Kevin Joyce ServicesHomepage

Speak with a Representative 0295598344
Enquiry

Understanding Brown-Banded Cockroaches and How to Clear Them Out of Your Property

|

Brown-banded cockroaches are among the more disruptive and difficult pests for you to clear out of your home. These are especially problematic as they are smaller than most other cockroaches.

Key Points About These Cockroaches

Cockroaches like these are around 10 to 15 mm long in most cases. Their light brown bodies also make them hard to spot in some instances.

These can also be found in many humid environments. They persist well in conditions of 70 to 80 degrees Fahrenheit, temperatures which also happen to be what most homes set their air conditioning units to.

Brown-banded cockroaches are extremely dangerous and disruptive to any home. You must have a proper cockroach control plan on hand to clear these pests out.

Look In the Right Spots

A cockroach pest control plan should start by looking into the right spots where these pests could be found in. Check around ceilings or your attic to see if they are out there. Look around your appliances too as cockroaches might thrive near their motors.

Watch for any droppings or egg casings around your home. These are often left near spots where a cockroach nest or colony is located.

How Are They Cleaned Out?

A cockroach exterminator will clear out cockroaches by getting rid of old food sources that might be lying around a home and by sealing off windows and plugging cracks around your foundation, attic or other spaces in your home. After this, it becomes easier for the cockroach control process to work as proper food sources or points of access for such pests are cleared.

Proper pesticides are then used. Bug spray companies make numerous industrial strength formulas for control teams to use with some of them being designed within brown-banded cockroaches in mind. Such items have to be applied around baseboards, windows and other problematic surfaces. Baits and gels might be needed in attics or other tight spots as it is often easy to lure pests out in those areas or to use something that can easily spread around an entire spot.

Ask a cockroach pest control team to see what it can do when clearing out brown-banded roaches from your property. A plan to exterminate roaches must entail not only cleaning out pests but also keeping them from getting in.

What to Do About Installing Bird Spikes

|

Bird spikes are used in many spots to keep birds from roosting and perching on spots that they are not welcome in. You might notice them along large commercial buildings, industrial sites and even mass transit stations. Such spikes keep pigeons and others from leaving droppings, feathers and even bird lice.

But how are bird spikes supposed to be installed? They can be mounted and bolted onto many surfaces but you have to look at what you are adding to get an idea of how well such spikes might work for you.

How Wide Are the Spike Strips?

Length is important as you need enough room for your spikes to work. But length is not the only thing to consider when getting spikes. You must also look at how wide the spike strips are.

A great spike strip should be around five to eight inches wide. This is enough to let it hang on a ledge or other slim surface while still being narrow enough to keep pests from being stuck in a spot.

Do check on how large the pigeons or other birds you are trying to clear out are before adding such strips. Wider materials might be needed if the birds are too large.

How Dense Are the Spikes?

The spikes should be spaced out enough to where there are no large spots for birds to try and perch on. Such bird control spikes should be around an inch or two apart from one another. This offers enough room to where it is hard for birds to actually perch on a space.

Where Will You Install It?

Such spikes should also be installed in a spot where they are bound to be more effective. For instance, spikes may be applied around a bench or seating area or near the entrance to a property. Think about where people are more likely to be found at and add the spikes around that area. Any other spot could work too but try and focus on where people are more likely to be found in if only to keep the threat of bird lice being stuck in one’s hair from being a concern.

Be certain when finding great bird spikes that you look at how they are designed. These must be installed properly and in a space where it will be more effective.

Common Materials Used in the Wasp Nest Removal Process

|

It is critical that you do not try to burn a wasp nest or use force to clear it out as those processes could agitate the wasps inside and make it all the more dangerous. Rather, you need to get a wasp pest control team on hand to help you with your wasp nest removal needs. Many materials are used by removal teams to ensure the threats associated with such nests are limited or eliminated.

How Are Pesticide Sprays Used?

A good pest control company will use pesticide sprays. The best pest control company ensures that such sprays will be used right. Aerosol-based sprays are often used but the ingredients used should be analysed.

Wasp pest control teams typically used industrial strength solutions that you will not find in a typical store. Some ingredients might foam over the nest to cover more spaces while others will immediately freeze the nest and stop it from functioning.

Such sprays do not necessarily work immediately. It might take a few days for the control team to see how well the nest is responding to the pesticides. This is to allow the nest to be removed at a time when the risk of pests being found in a spot is minimal.

Can Dish Soap Work?

A pest control team could also apply dish soap onto the nest. This is ideal for cases where pesticides might be too dangerous to add in your space. A team would have to use a strong formula and apply it multiple times over the course of a few weeks to clear out and weaken the nest.

Is Smoke Useful?

Smoke may be generated by a pest control team as well. Smoke helps to add heat to the nest to force wasps out over time. Small amounts of smoke should be applied gradually over time. This is better than just burning the nest as direct heat from a fire would only cause panic in the nest, thus causing some of these pests to sting people right away.

Getting rid of a nest during the wasp control process can take a bit of time but it will be efficient if the right materials are used. Check with a pest control for home team to see what can be done to clear out a nest before it can be extremely dangerous.

Key Points For a Possum Catch and Release Process To Notice

|

Possums are among the largest pests you might find in any part of the Sydney area. They can burrow through your home, damage its insulation and even leave droppings. A possum catch and release service will help you with clearing these large pests out before they can harm your home or put the health of anyone inside at risk.

What Kind of Trap Works?

The best pest control solution for clearing out possums is to use a proper trap. A cage that is around 32 inches in length and 12 inches wide should be good enough. This offers enough space for the possum to get into.

How Is the Trap Secured?

The process for securing a trap should be the second part of this pest control management solution to use. The trap should include foods that the possum will look for. Bread is always useful as possums often feed off of it but other animals are not as likely to.

After the bread is prepared and added into the trap, a proper trigger mechanism should be placed on the floor. The trigger will close up the trap when the possum steps into it.

The trap should be checked regularly. This is to see that a possum is actually being caught and that no other animal accidentally gets into it.

Moving It Out

The possum must then be moved out of your property. The cage should be taken far off from your home for the best results. Placing the possum out in the wild always helps although it should be added into a forested area or other spot that is far from other properties. This residential pest control solution must be completed without putting other homes at risk.

Getting a possum out of your property does not have to be overly hard to do. Make sure you get a proper trap ready for your possum catch and release plans so it will be cleared off of your property without outside problems getting in the way.

What Goes Into a Termite Inspection Report?

|

The North Shore region is a spot that termites can be easily found in. A timber pest inspection is required around your property if you suspect that termites are in your space. A proper termite inspection report can be prepared to analyse what is happening in your property so you can understand what treatments need to be applied.

Proper Drawings

A termite inspection to common areas should include diagrams or drawings of individual spots around your home. These should include markings of any termite activities that were found. Reports on potential damages and where termite nests may be found should be applied in the review to give you an idea of how intense the treatment process should be.

A Termatrac inspection may figure out how sensitive infestations might be without having to open any walls. The readouts from an inspection will have to be noted and marked on your inspection report.

Notes on Construction

A termite inspection report must also include details on the overall construction within your home. This includes a review of the basement, foundation, slab and other spots around your home. This is to get an idea of what types of treatment options might be suitable for your specific home.

What Risks Might Be Present?

Some risks could be prominent around your home. These include threats like moisture issues around you home, heating systems that are in the way of a spot or water fixtures. A report should include details on what items are in a space as a means of understanding what treatment options might work the best in that area.

Review the Cost

The termite inspection cost should be covered in the report. This should include details on the cost of reviewing your home and any materials that would be used in the treatment process. Such a review helps you to understand what you would have to spend. This can especially work if you are trying to get multiple quotes or opinions from people who want to fix up your home and clear out its termites.

Have a proper timber pest inspection service work for you as soon as possible. This is to get a report that helps you understand where termites might be in your home and what should be done to keep them out of a space.

Key Points For Exterminating Bed Bugs That Must Be Followed

|

Bed bugs can get into any property in Sydney. They can be disruptive but also hard to clear out unless you have the right plans on hand for killing them off. You have to look at how a plan for exterminating bed bugs may work so the risk of such bugs crawling around your property is reduced.

Steaming Works

Steam is often used in a treatment for bed bugs. Steam works by adding excess heat to the bed bugs. This in turn kills them off and also destroys any eggs that might be present. Steaming especially does well in the event you cannot use pesticides due to health-related issues.

Fabric Seams Are Treated

All parts of your fabrics have to be taken care of in a bed bug treatment process. Individual seams and openings in your fabrics are spaces that bed bugs can easily get into. Heat treatments are needed around all openings to clear out all bed bugs.

Keep the Baseboard Healthy

The baseboard on the bed should be checked properly. The baseboard is a popular site for bed bugs in that it can be dark underneath the board. This creates a cool space for bugs to be found in. A bed bug exterminator Sydney must also look for any cracks or openings around the baseboard and treat those as well. Such small spaces are common places where bugs can hide in.

How Much Time Is Needed?

Plenty of time is needed if you want to get rid of bed bugs. Your fabrics and other items that were impacted might have to be quarantined for at least thirty days. This is to reduce the likelihood of a reinfestation. Any old spots that the bed bugs might have been found around would have to be cleaned off carefully.

Getting rid of bed bugs can be easy to do if you get someone to help you fix up the problem as soon as possible. Talk with a bed bug extermination team in Sydney to see what can be done with regards to planning a treatment for bed bugs in your home.

How Does the HomeGuard Installation Process Work To Protect Your Home?

|

The HomeGuard system has been heralded as being one of the best termite control options that can work in your home. HomeGuard termite barriers work within your home’s foundation to produce a strong physical covering that keeps termites from being as likely to get inside. It especially keeps subterranean termites from getting into your property as it goes around the base.

The HomeGuard installation process should work as your property is being built. It is intended to work inside your foundation and will appear right around the spot where the foundation comes out of the ground.

What It Is Made Of

The HomeGuard termite control material works as a sturdy physical compound that goes over the foundation. It typically works as a liner or slab. It is flexible as the liner can be cut and sealed off. It may also go into the perimeter wall cavity.

The HomeGuard compound is lined up around the outside part of your home to stay protected. It also contains Biflex, a termiticide that has been proven to work for a variety of termite control plans. This lasts for years on end as Biflex does not break down very easily.

A Flexible Option

This pre-slab treatment option works quickly to create a strong layout. The treatment works as it creates a secure space around the property to ensure that termites will not get into the foundation. This quickly works to protect your property.

May Also Handle Moisture

The barrier could also keep moisture from getting into your foundation. The physical barrier prepared by the HomeGuard material adds an extra amount of support to keep your foundation secure without risking problems like rain sneaking into the foundation and being at risk of harm.

Make sure you look at how a HomeGuard installation plan will assist you in getting the most out of your home. Be certain that you get your compound applied during the construction process so the risk of termites moving into your property will be minimal.